Saws & Roughers Photos
 
Products | Saws & Roughers

Saws, Roughers & Back-up Plates
DON’T SETTLE FOR POOR, LOW-QUALITY IMMITATIONS!!!
Call/email to find out how affordable Original Comstock & Wescott Saws and Roughers can be.

Saws for Comstock & Wescott / Goss / Harris / Sheridan / Heidelberg Cutting Equipment
Comstock & Wescott, Inc.  produces tough, durable, precision crafted Saws to meet any need.  All Comstock & Wescott, Inc. Saws and Roughers are fashioned on the latest CNC machines.

C-44 / C-45 - 11 ½ inch, 10 Tooth Dustless Saw, Right & Clockwise & Counterclockwise - Cuts stocks with low cutting forces, producing bale-able scrap.  Recommended for speeds of less than 185 books per minute.

C-2044 / C-2045 -
11 ½ inch, 20 Tooth Dustless Saw, Right Clockwise & Counterclockwise -  Replaces ten tooth saw for higher speed applications, over 185 books per minute, and difficult stocks.  Produces bale-able scrap.

C-3044 / C-3045 -
11 ½ inch, 30 Tooth Dustless Saw, Clockwise & Counterclockwise -  Recommended for thicker books run at high speeds, over 200 books per minute.

C-102/C-103 -
Cartridge Saw - Clockwise & Counterclockwise - Ten rugged, reversible, easily replaceable teeth (C-104) produce up to 8 times the life of traditional dustless saw blades.  Recommended for speeds under 200 books per minute.  Works well with high clay content stocks.

Roughers for Comstock & Wescott / Goss / Harris / Sharidan /  Heidelberg Cutting Equipment
Comstock & Wescott Roughing Blades provide the uniform roughing with the greatest amount of fiber exposure of any roughing blade on the market.  It operates on the principle of drawing down fibers, not from cut pages, but from torn surfaces, producing a uniform backbone with no unsightly tabs.  Two blades in one, these roughers are reversible, offering twice the life of conventional roughers.

C-54 - 48 Tooth Reversible Rougher. Used in first position on a Dual Rougher.  Produces Recommended for slower speeds. 

C-66- 48 Tooth Reversible Raker Rougher with Optional Slashers (C-75A) - Final preparation, (second station) roughing blade.  Optional slasher teeth available to create notch pattern.  Recommended for slower speeds.

C-106 -
72 Tooth Reversible Rougher.  Used in first position on a dual rougher.  Recommended for faster speeds.

C-89 -
72 Tooth Reversible Raker Rougher with Optional Slashers (C-75A) - Final preparation (second station) roughing blade.  Rakers knock-off excess hanging tabs.  Optional slasher teeth available to create notch pattern.

C-107, C-108, C-109 -
Additional 60 and 72 Tooth Roughers available for smooth final backbone preparation or to prepare for additional roughing.  Roughing angle, and therefore performance, can be adjusted to fit your specific needs.  Please call for additional information.

For Mueller Martini Binders
C-143 – (48 Tooth, 19.5cm Dia.) Universal Roughing head for Mueller Martini Binders.  Comstock & Wescott, Inc. answered the call of Mueller Martini customers who could not get enough exposed fiber from their Muller Martini blades.  Hundreds installed around the world.

For Kolbus Binders
C-6840 - (40 Tooth, 15cm Dia.) / C-6848 - (48 Tooth, 19.5cm Dia.) Designed by C&W Engineers, at the request of Kolbus users, to increase the amount of exposed fibers produced during the roughing process.

Back-Up Plates for Comstock & Wescott / Goss / Harris / Sheridan / Heidelberg  Cutting Equipment

C-16 -
Standard Chrome Plated 7.75” Brass Back-up Plate

C-2090A -
Chrome Plated 9.25” Brass Back-up Plate

C-79 –
Linear Back-up Plate (phenolic)

Additional Back-up Plates in stock.  Please call for more information.

 
     
© 2008 Comstock & Wescott Inc.